|
Ritmo UPS 800VA with RS232 Port and TEL/LAN Surge Protection
Features :
Pure sine wave output.
CPU control and excellent performance.
Input frequency: both 50Hz and 60Hz.
Special domancy mode; energy saving and environment protection.
All-round protection.
Low noise.
UPS starting and testing
- After connecting the commercial power, turn on power switch.
- Turn on the switch of the connected equipment.
- To test the UPS, when remove the commercial power socket, there will be a sound of serge which shows the UPS works successfully.
UPS connection
Do not connect the standby electric outlet with fax, scanner or printer.
Specifications:
| Model |
AS 800VA |
| Max. Output capacity(VA) |
800 VA |
| Input |
Commercial power range |
Approximately 240 |
| Frequency |
50Hz |
| Commercial power |
Sine-wave |
| Output |
Inverter voltage |
Approxiamately 240 |
| Inversion |
Sine-wave |
| Frequency |
Commercial power supply: shared frequency with the commercial inversion state: approximately 50 |
| Transfer time |
Typical:5ms |
| Protection |
Spike protection |
320joules,2ms |
| Filter |
10dB at 0.15MHz, 50dB at 30Hz |
| Overload |
UPS automatically shutdown |
| TEL/FAX/MODEM |
RJ45/11 JACKS |
| Short circuit |
UPS output is cut off immediately or input circuit breaker protection |
| Alarm |
Battery backup |
Beeping 4 times every 30 seconds when the input is cut off |
| Battery low voltage |
Beeping sound every 1 second when the battery power is over |
| Overload |
Turn off UPS automatically |
| Battery |
Type |
Sealed, maintenance-free lead acid |
| Capacity |
(12V,7AH) X 1 |
| Recharge time |
8 hours to 90% of full capacity |
| Backup time |
Typical 10 min(half load) |
| Battery protection |
Automatic self-test, discharge protection |
| Communication interface |
RS232 |
Bi-directional communication port |
| Appearance |
Net weight |
3.3kg |
| Gross weight |
3.9kg |
| Size(mm) D X W X H |
283 X 162 X 97 |
| Remark |
RS232 port function(dry contact point) |
|
Account
